Snow Cone Machine Instructions
Follow these instructions to operate the machine correctly. If you have any questions about proper use, please call the store (260) 484-3964 and ask for assistance.
Operating Procedure
1. Turn On Light, fill the gooseneck with ice cubes or block ice broken into places 3” to 4” in size. Fill to about an inch or so from the top, the larger the piece of ice the better the snow. Push in Red Motor Switch Button and Hold.
2. Push the pusher handle down to Press the ice against the cutterhead. A firm even pressure is all that is required, but sometime you will find it better to relieve the pressure two or three times on the way down. This lets the ice rearrange itself and you get a better bite.
3. DO NOT FORCE THE HANLE too much as motor could be stalled.
4. When too much pressure is necessary, relieve the handle, and then come down again. Too much pressure on the pusher handle will make the ice came out coarse; too little pressure makes the ice mushy.
In normal operations the motor gets warm-a surface temperature of 150 degree is normal.
Caution
Do not let any metal get down in the gooseneck, or you will ruin the blades.
Never put your fingers or any abject into the shaver body while the motor is running. Disregard for these instructions and careless handling will result in accounts and /or injury.
Cleaning
Always unplug the machine before cleaning. Wipe all surfaces clean before retuning to the rental center and AVOID ADDITIONAL CLEANING CHARGES.
